Latest:
Nordberg adds to Citycrusher
00:00 19 May 1994
|
Following the huge success of the first Citycrusher launched at
SED'92, the company has now added more models to the range.
The new model, the 10.07, is built around a proven Nordberg BP impact crusher with a 1,000mm diameter rotor which is capable of tackling rock, asphalt or reinforced concrete with sizes up to 500mm wide.
The exceptional ease with which the Citycrusher can be transported is enhanced by its compact dimensions of just 2.4m wide by 6.85m long, and it is well within the weight limit of a suitably equipped road going 8X4 chassis. The unit, powered by an integral 110kVA generator, weighs in at approximately 19t and offers outputs of between 50 and 100t/hr.
The 10.07 is currently the largest and most powerful Citycrusher and is designed specifically for recycling applications. The machine incorporates a 2.8m long feeder with a grizzly section at the end of the feeder to remove fines to minimise wear and increase capacity. A vibrating pan feeder below the crusher is used to absorb material shocks and prevent steel reinforcing bar puncturing the discharge conveyor. A 500mm by 4.8m conveyor, which can be fitted with an overband magnet for rebar removal, can also be folded to allow the complete unit to remain within transport length limits.
The crusher incorporates two breaker plates which are adjustable to specific application or customer requirements. Optimum flexibility is ensured by the option of three types of hammer which can be quickly changed to suit a wide range of materials and feed rates.
Details: enter 915 on card
The new model, the 10.07, is built around a proven Nordberg BP impact crusher with a 1,000mm diameter rotor which is capable of tackling rock, asphalt or reinforced concrete with sizes up to 500mm wide.
The exceptional ease with which the Citycrusher can be transported is enhanced by its compact dimensions of just 2.4m wide by 6.85m long, and it is well within the weight limit of a suitably equipped road going 8X4 chassis. The unit, powered by an integral 110kVA generator, weighs in at approximately 19t and offers outputs of between 50 and 100t/hr.
The 10.07 is currently the largest and most powerful Citycrusher and is designed specifically for recycling applications. The machine incorporates a 2.8m long feeder with a grizzly section at the end of the feeder to remove fines to minimise wear and increase capacity. A vibrating pan feeder below the crusher is used to absorb material shocks and prevent steel reinforcing bar puncturing the discharge conveyor. A 500mm by 4.8m conveyor, which can be fitted with an overband magnet for rebar removal, can also be folded to allow the complete unit to remain within transport length limits.
ADVERTISEMENT
The crusher incorporates two breaker plates which are adjustable to specific application or customer requirements. Optimum flexibility is ensured by the option of three types of hammer which can be quickly changed to suit a wide range of materials and feed rates.
Details: enter 915 on card
ADVERTISEMENT
Most Viewed Articles
ADVERTISEMENT