[No headline.]

Machine MF860 MF60HX

Engine 1004.4 TLR2 T4.236

Power EEC 80/1269kW @ rpm 67/2200 66.4/2200

Standard tyres front 16/70x20 12.5/80x18

rear 16.9x30 18.4x26

Machine operating wgt as test kg 7,800 7,600

List price œstg POA 34,756



LOADER SPEC (7 in 1 bucket)

Bucket capacity(m3) 0.95

Breakout force(kg) 5,820 4,010

Dump clearance height(m) 2.75 2.65

Crowd at ground(deg) 47 48

Dump angle full height(deg) 57 50

Forward reach at full height(m) 0.64 0.71



BACKHOE SPEC

Dig depth dipper retracted (m) 4.46 4.5

extended(m) 5.86 5.85

Max reach @ ground dipper retraced(m) 5.88 5.62

extended(m) 7.18 6.83

Bucket breakout force(kg) 5,260 4,880

dipper retracted dig force(kg) 3,300 3,177



TEST 1: LOAD FROM SANDY GRAVEL, STOCKPILE DIRECT INTO TRUCKS

Total material loaded(t) 158.00 136.78

Average cycle time(sec) 19.68 23.87

Average bucket payload(t) 1.98 1.71

Average truck payload(t) 19.75 17.10

Average production rate(t/hr) 361.28 257.85

Production advantage(%) 40.12 -

Fuel consumption(litre/hr) 15.60 19.52

Fuel consumption advantage(%) 20.05 -

Fuel efficiency (t/litre) 23.16 13.21

Fuel efficiency advantage(%) 75.26 -

Unit cost(œ/100t) 4.51 6.60

Unit cost advantage(%) 31.66 -



TEST 2: TRENCH EXCAVATION TEST AT FULL ENGINE SPEED - 610MM WIDE BUCKET

Total time taken for test (min) 133.01 142.02

Total material loaded(m3) 73.20 73.20

Average production rate(m3/hr) 33.02 30.92

Production advantage(%) 6.77 -

Fuel consumption(litre/hr) 12.21 17.99

Fuel consumption advantage(%) 32.16 -

Fuel efficiency(m3/litre) 2.71 1.72

Fuel efficiency advantage(%) 57.39 -

Unit cost(œ/100m3) 47.54 54.13

Unit cost advantage(%) 12.17 -



TEST 3: TRENCH EXCAVATION TEST AT FULL ENGINE SPEED - 914MM WIDE BUCKET

Total time taken for test (min) 38.01 43.02

Total material loaded(m3) 36.56 36.56

Average production rate(m3/hr) 57.71 50.99

Production advantage(%) 13.81 -

Fuel consumption(litre/hr) 11.75 17.84

Fuel consumption advantage(%) 34.15 -

Fuel efficiency(m3/litre) 4.91 2.86

Fuel efficiency advantage(%) 94.77 -

Unit cost(œ/100m3) 27.06 32.77

Unit cost advantage(%) 19.32 -



TEST 4: TRENCH EXCAVATION TEST AT REDUCED ENGINE SPEED - 914MM WIDE BUCKET

Total time taken for test (min) 46.46 47.31

Total material loaded(m3) 36.56 31.80

Average production rate(m3/hr) 47.21 40.33

Production advantage(%) 17.07 -

Fuel consumption(litre/hr) 8.20 14.32

Fuel consumption advantage(%) 42.72 -

Fuel efficiency(m3/litre) 5.75 2.82

Fuel efficiency advantage(%) 103.90 -

Unit cost(œ/100m3) 31.72 39.87

Unit cost advantage(%) 20.44 -



TEST 5: BASEMENT APPROACH RAMP

Total time taken for test (min) 19.25 28.23

Total material loaded(m3) 27.39 27.90

Average production rate(m3/hr) 85.37 59.30

Production advantage(%) 43.97 -

Fuel consumption(litre/hr) 13.93 18.50

Fuel consumption advantage(%) 24.69 -

Fuel efficiency(m3/litre) 6.13 3.20

Fuel efficiency advantage(%) 91.18 -

Unit cost(œ/100m3) 18.75 28.38

Unit cost advantage(%) 33.93 -



PARTS PRICING COMPARISON (œ)

New engine 3096.15 3372.19

Service exchange engine 1929.00 n/a

Crankshaft kit 723.52 723.52

Starter motor (new) 194.25 194.25

Service exchange starter motor n/a n/a

Engine lube oil filter 4.48 5.56

Main hydraulic filter 31.58 31.58

Tandem hydraulic pump (new) 523.25 n/a

Single hydraulic pump (new) n/a 458.00

Small hydraulic pump (steering) 192.08 215.46

Dipper ram service exchange n/a n/a

Dipper hose 32.45 64.23

Bucket tooth 8.61 8.61

Fermec does not currently operate an exchange facility but it is the company's intention to introduce this service later this year.



Product Support/ Warranty

No. UK dealers 15

No. of depots 31

No. Field service engineers 67

No. Service vehicles 43

Warranty(months/ hours):Currently 24 months extended warranty as standard





In cab and external noise levels

In cab(dB(A)) 78 80

External(dB(A)) 105.7 105.6



Field Test calculations are based on 100% operator efficiency and 60 minute hours. No allowance made for waiting times for trucks. Fuel consumption figures are recorded before and after each test. Unit cost calculations based on hire rates of œ13.50/hour and fuel costs of œ0.18/litre. Sound levels to EC Directive 86/662/EEC. Field Test rules demand that all machines and vehicles are operated in accordance with safe site practices.