Fiat Kobelco completes excavator range with introduction of E485

Fiat Kobelco has completed its excavator line up with the introduction of the E485 Evolution. The unit has a 48.25t operating weight in standard configuration, or 50.25t when fitted with the long undercarriage. It is powered by a six-cylinder 240kW Isuzu engine.
Fitted with the standard dipper, the maximum dig depth is 8.3m and the dump height is 7.8m. It has a bucket breakout of 248kN increasing to 270kN with Power Boost. Its ROPS/FOPS cab has elasto-viscous mountings and an air-suspended seat to reduce vibration reaching the operator. A large glass area and transparent roof improves operator visibility.
An on-board computer provides: automatic priority sensing; engine speed monitoring; a maintenance programme; self-diagnosis; and operating-data storage.
There are three operating modes: standard for routine work; heavy/mechatronic for maximum power; and attachment mode, which allows the operator to select and store information applicable to specific tools.
The heavy-duty track features an increased link pitch, while the two-speed hydrostatic drive provides a 5.6km/h travel speed and 35o climbing ability. Automatic centralised lubrication can be programmed to control the frequency and quantity of grease dispensed.
The E485 extends Fiat Kobelco's crawler excavator range to 16 base models between 8t and 82t.